Description
OMNI Power 4.0 Bar MAP Sensor – Mitsubishi EVO 7-10
This OMNI Power MAP sensor is a direct plug and play upgrade sensor for an easy install and an OEM look.
Useful for fitting to certain EVO 7-10 models with either a factory fitted MAP sensor on the intake manifold or provision for a MAP sensor cast into the factory manifold (the sensor boss will need to be drilled through completely). Some aftermarket cast alloy manifolds for various EVO models also accept this sensor.
This OMNI MAP sensor reads up to 4 Bar absolute pressure, meaning that it is suitable for applications running up to 3.0 Bar (or 44psi) of boost pressure.
ECU re-calibration is required after fitting this sensor. The linear calibration for this 4 Bar OMNI MAP sensor is:
- Calibration points are 20kPa absolute = 0.2V, 400kPa absolute = 4.8V or using Link G4+/G4X ECU’s just select the MAP sensor type as ‘4 Bar’
Note: We always recommend entering metric calibrations (pressure in kPa) into Link ECU’s which is required when transmitting data over CAN bus to external devices (dashes etc.). Even when entering sensor data into the ECU with metric units, data can still be displayed in PCLink either in metric or imperial as desired by the user (using the ‘U’ hot-key in PCLink). Likewise most dashes can be set up to display a range of units even if they are receiving data over CAN in metric units.
