OMNI 3 Bar MAP Sensor with Connector
OMNI 3 Bar MAP Sensor with Connector

3 Bar MAP Sensor – OMNI – Universal

$200.00 incl. GST (for NZ customers)

$173.91 excluding GST (for international customers)

All prices in NZD.

Product Description

OMNI Power 3.0 Bar MAP Sensor with Connector

 

This OMNI Power MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure.

 

  • Includes 3-pin connector kit
  • The MAP sensor is easy to mount and features a downward facing electrical connector and vacuum port. This reduces the chance of water getting into the sensor. Note that the sensor should be mounted higher than the intake manifold port that the hose connects to.
  • Mechanical connection via 3/16″ hose connector nipple
  • The linear calibration points are 20kPa (absolute)= 0.3V, 300kPa (absolute)= 4.752V

 

Wire numbers 1-3 are marked on the rear of the supplied connector. With respect to these markings, the wiring pinout for this sensor is as follows:

 

Pin 1 = Sensor ground
Pin 2 = MAP Signal
Pin 3 = +5V supply to sensor

 

Note: We always recommend entering metric calibrations (pressure in kPa) into Link ECU’s which is required when transmitting data over CAN bus to external devices (dashes etc.). Even when entering sensor data into the ECU with metric units, data can still be displayed in PCLink either in metric or imperial as desired by the user (using the ‘U’ hot-key in PCLink). Likewise most dashes can be set up to display a range of units even if they are receiving data over CAN in metric units.

Additional Information

Weight 100 g

Product Enquiry