Mitsubishi EVO 1-9 1000cc/min Direct Fit Fuel Injector Kit

$ 520.00$ 569.00

Incl. Tax (NZ Customers)

Excl. Tax (International Customers)

Mitsubishi EVO 1-9 1000cc/min Direct Fit Fuel Injector Kit



This item is for a set of four brand new Bosch 1000cc/min fuel injectors to suit Mitsubishi EVO 1-9 4G63T engines.


We sell this Ev14 1000cc/min fuel injector in its unmodified form as it comes from Bosch. Each injector is tested and graded into batches prior to sale. We always sell these to our customers as a matched set. These injectors are specifically designed by Bosch to be flex fuel (ethanol) compatible and also have an exceptional spray pattern and low pulse width characteristics.


This injector is not a lower flowing Bosch EV14 series injector that has been de-capped to increase the flow rate at the expense of the spray pattern.  Such injectors which are commonly sold and used in the automotive performance industry, so please be aware that not all injectors being sold as Bosch EV14 1000cc/min injectors are the same.

Supplied with a special bottom seal and buffer seal, these injectors are a drop-in replacement for all Mitsubishi Lancer EVO 1-9 models. Also features an 11mm top o-ring and a Bosch Minitimer EV1 electrical connection meaning that no fuel rail or injector plug changes are needed.


While the factory EVO 5-9 560cc/min fuel injectors are suitable for applications up to around 300-320 awhp, these Bosch 1000cc injectors are our recommended injector for applications above 320 awhp and are included in our EVO 4-9 power upgrade packages for Stage 2 and beyond.


These are a high impedance injector, so they can be used with all after market ECU’s without the need to use ballast resistors. If the factory resistor pack is still fitted to your vehicle, it must be removed when using this injector kit. As an option, a ballast resistor delete is also available with this injector kit as a variation.


Despite their massive 1000cc/min flow rate, these injectors have excellent characteristics at idle and low loads.


Note that while these injectors are physically a direct fit, ECU retuning will be required

Additional information

Weight 400 g

Part Type



Product Enquiry

Your cart is currently empty.

Return to shop

Shopping cart0
There are no products in the cart!
Continue shopping