Description
This is our current favourite injector!
We sell this Ev14 1000cc/min fuel injector in its unmodified form as it comes from Bosch. Each injector is tested and graded into one of 3 flow matched batches by Bosch prior to sale. We always sell these to our customer’s as a matched set. These injectors are specifically designed by Bosch to be flex fuel (ethanol) compatible and also have an exceptional spray pattern and low pulse width characteristics.
This injector is not a lower flowing Bosch EV14 series injector that has been de-capped to increase the flow rate at the expense of the spray pattern. Such injectors which are commonly sold and used in the automotive performance industry, so please be aware that not all injectors being sold as Bosch EV14 1000cc/min injectors are the same.
- Excellent atomisation, droplet sizing and spray pattern providing the ability to achieve perfect idle along with great economy and the potential for increased power.
- “1/2 Length” extended nose injector which has top and bottom spacers / adapters included to make the fuel injector “standard” length. These adapters can be supplied with a 11mm or 14mm top o-ring to suit your fuel rail.
- High Impedance, so works with all aftermarket ECU’s without the need to use ballast resistors.
Injector plugs are also available (not included)
Specifications:
| Top and Bottom O-ring Size | 14mm |
| Impedance | 12 Ohm (high) |
| Flow Rate (cc per minute) | 906cc/min @ 3 Bar |
| Flow Rate (cc per minute) | 1080cc/min @ 4 Bar |
| Injector Connector | EV1 Minitimer |
| Spray Pattern | 30 degree single cone |
| Dead-time data | Can be supplied with purchase |
