Description
Contactless Throttle Position Sensor – Universal (Dual-Channel – Clockwise, Counter-clockwise)
Ideal for arduous motorsport applications, this high quality dual-channel contactless universal throttle position sensor is suitable for use on throttle bodies with either a clockwise or a counter-clockwise rotation. This contactless throttle position sensor is extremely robust and experiences almost no mechanical wear (typical life cycle >50 million movements). Designed for the harshest working environments, this sensor has excellent resistance to temperature, moisture and vibration.
Suitable for E-throttle / Drive-by-Wire (DBW) applications requiring a redundant signal, this sensor measures 110 degrees of rotation range, with Ch1 and Ch2 moving simultaneously but inverse to each other (signal cross over point being the midpoint of rotation).
The TPS will adapt to a “D” shaped throttle shaft and is compatible with Link G4+ / G4X ECU’s as well as most other aftermarket brands.
This sensor does not have an internal spring and relies on the main throttle shaft spring to return it to a ‘home’ position. Therefore, a tight fit between the throttle shaft and the sensor is essential to ensure accuracy and reliability.
Sensor kit includes:
- 1 x Universal contactless throttle position sensor with approximately 500mm ‘flying lead’ wires (can be shortened)
- TPS Mounting Spacer (3mm) – Suitable for using as a spacer to prevent binding
Specification:
- Drive = 8mm “D” shaft
- Mounting hole spacing = 32 mm
- Supply voltage = 5V
- Output range: 0.25V to 4.75V
- Closed throttle = 1.2V nominal (Ch1), 4.2V nominal (Ch2)
- Open throttle = 4.2V nominal (Ch1), 1.2V nominal (Ch2)
- IP rating = IP68 (minimum)
- Typical life cycle = >50 million movements
- Electrical cable = Raychem Spec 55, 24 AWG
- Electrical cable sleeving = Raychem DR25
- Operating range of rotation = 110 degrees
