Description
3-pin Nissan Blue Heated Oxygen Sensor Connector – SR20VE / QR20DE etc.
Suits P12 Primera SR20VE and QR20DE models. Examples of sensors that this connector fits are Nissan part numbers 22690-6N206 and 22690-9F601.
This side of the connector has female terminals, which is commonly the engine harness side.
By default, we supply this connector with terminals to suit 0.85-1.25 mm2 (18-16 AWG) wire, which is the ‘medium’ size. However, we can swap out the terminals for either smaller, or larger terminals if required – see below. Please leave a note in the ‘order notes’ section stating which size you need.
Small – Wire size = 0.3-0.5 mm2 (22-20 AWG) – Available on request
Medium – Wire size = 0.85-1.25 mm2 (18-16 AWG) – Supplied with connector kit as default terminal
Large – Wire size = 2.0 mm2 (14 AWG) – Available on request
Connector comes with connector housing, terminals and seals.
Please check your original connector’s shape and keying before purchasing!
