Description

3-pin OEM Nissan Late Coil Connector

This is the OEM connector found on the following Nissan applications:

This connector is device compatible with the earlier grey R33 S2 / SR20 coil connector found on 1990’s models such as S13/S14 Silvia and R33 S2 Skyline models, but is the later series of connector introduced to Nissan wiring looms from around 1999-on. These later connectors have different terminals and a white front lock (rather than yellow).  It is typical to find these later connectors start to appear on models such as S15 Silvia, R34 Skyline and then be used extensively on models from the early 2000’s-on such as 350Z, V35 Skyline, R35 GTR etc.

By default, we supply this connector with terminals to suit 0.85-1.25 mm2 (18-16 AWG) wire, which is the ‘medium’ size. However, we can swap out the terminals for either smaller, or larger terminals if required – see below. Please leave a note in the ‘order notes’ section stating which size you need.

Small – Wire size = 0.3-0.5 mm² (22-20 AWG) – Available on request

Medium – Wire size = 0.85-1.25 mm2 (18-16 AWG) – Supplied with connector kit as default terminal

Large – Wire size = 2.0 mm² (14 AWG) – Available on request

Connector comes with connector housing, terminals and seals.

Please check your original connector’s shape and keying before purchasing!